RightWay GPS Navigator RW 430 Betriebsanweisung PDF herunterladen (Seite 45)

GPS RTK Base GPS Receiver User Guide 43

Configuring the Receiver Using the Keypad and Display 6

Configuring the receiver as a base receiver

To set up the AgGPS RTK Base receiver as a base receiver, use AutoBase

technology or the receiver keypad.

The AutoBase feature automatically configures the receiver settings for

you: there is no need to use the keypad. The receiver obtains a position

and outputs RTK corrections on the internal radio. See Chapter 7,

Automatically Setting up a Mobile Base Station Using AutoBase

Technolog y.

The receiver is configured step-by-step to ensure that all appropriate

settings are configured. To move between steps in the configuration

process, press

L .

Configuring the receiver

1. In the Home screen, press L . Use the Operation Mode screen to

configure system settings, mode settings, or to view the SV

(satellite) status. Mode Settings is the default setting.

2. Press

L . Base is the default setting and cannot be changed.

3. Press

L . Use the Base Station screen to select whether the

receiver is going to use a “Here” position or if the current

coordinates in the receiver will be changed.

4. Press

G . When Edit Current begins to flash, the receiver is in

Edit mode and you can change the current setting.

5. Press

K . The setting changes to New Base (Here).

6. Press

L to accept the change.

7. Press

L again. The Base Name screen appears. See next.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 93 94

Keine Kommentare

RightWay GPS Navigator RW 430 Betriebsanweisung Seite 45