RightWay GPS Navigator RW 430 Betriebsanweisung PDF herunterladen (Seite 48)

6 Configuring the Receiver Using the Keypad and Display

GPS RTK Base GPS Receiver User Guide

4. Use the Antenna Height screen to change the height of the

antenna. Press

L . When the first character of the antenna

height begins to flash, the receiver is in Edit mode and you can

change the antenna height. The antenna height should be set to

0.00 for most applications.

5. Press

J or K  to change the value of the character.

6. Press

G to move the cursor to the next character.

7. Repeat Step 5 through Step 6 to enter the height of the antenna.

8. Press

L to accept the change.

9. Press

L again. The Output screen appears. See next.

Outputting corrections

In the Output screen:

1. Press

G to enter Edit mode for the port.

2. Press

J or K  to change which port will be used to output

corrections. Select Radio to use the internal radio, or Lemo to use

an external radio connected via the Lemo connector.

3. Press

L to accept the change.

4. Press

K  to move the cursor to the Format field. The default

format is RTK CMR+, which cannot be changed.

5. Press

L .

6. Use the NMEA screen to set up NMEA outputs from the receiver.

Press

L to accept the default of no NMEA messages.

7. Use the GSOF screen to set up GSOF outputs from the receiver.

Press

L to accept the default of no GSOF messages.

8. Use the RT17 screen to set up RT17 outputs from the receiver.

Press

L to accept the default of no RT17 messages.

The Home screen appears and the base setup is complete.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 93 94

Keine Kommentare

RightWay GPS Navigator RW 430 Betriebsanweisung Seite 48