RightWay GPS Navigator RW 430 Betriebsanweisung PDF herunterladen (Seite 49)

GPS RTK Base GPS Receiver User Guide 47

Configuring the Receiver Using the Keypad and Display 6

Configuring system settings

You can use the keypad and display of the receiver to configure the

following settings:

• Display language

• Display and input units

• Baud rate, parity, data bits, and stop bits for serial ports

• Display power saver

• AutoBase warning

To access the system settings:

1. In the Home screen, press

L . Use the Operation Mode screen to

configure system settings or mode settings, and to view the SV

(satellite) status. Mode Settings is the default setting.

2. Press

G . When the operation mode begins to flash, the receiver

is in Edit mode and you can change this setting.

3. Press

K  to change to System Setup.

4. Press

L to accept the change.

5. Press

L again.

6. Use the Display Language screen, if necessary, to change the

language. Choose English, Finnish, French, German, Italian,

Spanish, or Swedish. Press

L to accept the change.

7. Press

L again. Use the Display and Input Units screen, if

necessary, to change the units to Meters or US Feet.

8. Press

L to accept the change.

9. Press

L again. Use the Port Settings screen, if necessary, to

change the port.

10. Press

L to accept the change.

11. Press

L again. Use the Screen Pwr Savr screen to choose On, Off,

or Auto. If you use the Auto setting, the screen turns off after

60 seconds of inactivity. The Power LED remains lit so that you

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 93 94

Keine Kommentare

RightWay GPS Navigator RW 430 Betriebsanweisung Seite 49